DIY Crystal Hair Pins

A couple of my brides this year introduced me to BHLDN – the wedding line under the same company as Anthropologie.  I am in love with both lines because all their items are gorgeous, classic and unique.  Vintage-classic brought back to life 🙂

I was scanning for hours, pinning practically every item to my Pinterest boards, when I came across this:

Wow…pretty…
I love the whimsical look of the pins and the fancy name (Dewed Vines Hairpin) also helps set the mood.  However, with all the expenses of wedding planning, I could never justify spending $140 on two hair pins.

So I did some research here and there.  There are hairpins that are similar on Etsy and other websites but they are all fairly pricey.

One day in the summer, by total fluke, I was driving by Beazu – a wholesale bead store – about a week after it opened and I whipped around the block so I can go in and take a better look.  I was in DIY HEAVEN!  Spent hours in there trying to plan out what I wanted to make.  I found some great items to recreate these beautiful pins.

A box of tiny spools of gold wire (I think it was about $12-15), a bag of clear 4mm bicone Swarovski crystal beads ($11.62), and a bag of crystal golden shadow 3mm bicone Swarovski crystal beads ($14.81).

Depending on how long you want each vine of crystal to be, you can play around with it.  Slide the first bead into the center of the wire and start twisting for about 1 cm.  Take slide another bead into one piece of the wire and twist again.  Do the same with the other wire and keep alternating – just approximately it and do it randomly to keep the look natural.

I made 10 vines, using the two different coloured crystals but you can use pearls or different sizes and shapes of crystals to change up the look.

I grabbed a hairpin (one similar to your own hair colour) and twisted the ends of each vine individually around the hairpin.

Make the stamen of the ‘flower’ shown above and twist between the vines.  Push all the vines together and wrap a separate wire all around the hairpin to secure all the vines in place.  Re-shape the vines into anything you find attractive!  I like the pinwheel shape.

And here we go!  For about $44 (with a lot of extra materials left to make more!) you can get your own customized crystal hairpins for your big day.  They’re so classic and pretty that they can also be worn for any special occasion, like prom or Christmas parties or weddings (as a guest) or maybe even a casual summer dress for a nice night out.

Above is a shot of me wearing it during my autumn photoshoot (this was taken at the end so the hair is a bit ruffled – excuse that 🙂 ).

Since I didn’t have a dress made for this season (I wore my sister’s wedding dress instead, which is another way to get some variety in your pre-wedding photos) the hairpins tutorial shall suffice!

I chose to do a semi-vintage updo with gentle fingerwaves at the fringe and a curly full bun.  My adorable fiance attempted to help me with the bun based on a picture I showed him – you know you’re marrying the right man when he actually attempts to do your hair for you 😉  Needless to say, he became a very helpful mirror-holder for me

Advertisements

DIY Wedding Gown #1 – Summer

“Ooh move!  I wanna see the bride’s gown!”

We all know that people stand for the arrival of the brides to catch a glimpse of her dress – at least the girls do.  Trying on the pretty gowns is also probably the best part of wedding planning.  I thought I would be one to spend hours/days/months visiting and re-visiting bridal shops before I’d settle on ‘the one’ but it only took me 20 minutes to find my fixer-upper dress (very excited about it!)

But I had an easier time picking my gown because I planned to wear multiple dresses – one for every season of the year 🙂

For the summer dress, my inspirations are:

I loved the Kate dress by Ellebay Bridal with the flowiness and the lace.  But when I saw the BCBG gown, I knew that would be perfect for a summer, beach wedding.  Especially with the light organza which doesn’t restrict movement and would not weigh me down if I wanted to walk into the water.

So a quick sketch to plan out how to connect my favourite elements of both gowns –

Fabricana is like my candy store.  I can spend hours in there – three to be exact.  You have no idea how hard it is to find beautiful lace.  The pattern I picked was a very common one that comes in many colours for a reasonable price.  Organza was on sale so bonus for me!

After picking up lining and notions, I was ready to start!

There are many sources on YouTube, even for the untrained DIY bride, to figure out how to create a pattern from a dressform.

1) Place muslin fabric (or any non-stretch scrap material) and pin onto the lines you marked.  Cut off whatever you don’t need!  Do this for half of the dressform.  You simply need to double it when you cut the fabric to create the other side and it will be symmetrical.

2) Remove the muslin pieces from the dressform and trace on paper, adding 1.5cm seam allowance around the edges.  Mark the corners, notches, darts, etc.  Place onto fabric and lining and cut.

3) Sew the bodice and skirt pieces separately.  Attach the bodice to the lining and make sure it fits!  Add bias tape to the waist of the lining to prevent stretching.

4) Pin the bodice onto the dressform and drape the lace over it.  Pin in place, creating the form of the body.  Using similar coloured thread that blends into the lace, handstitch it onto the bodice and onto the skirt.
With right sides together and the bodice in between them, stitch together the skirt to the lining. Add invisible zipper to the back.

5) Tear the strips of organza by hand.  Since it’s woven, non-stretch material, it rips very well and ends up perfectly straight.  Create a rolled hem all around the edges of the strips using a serger.  Fold the strips in half and press with an iron – props to Ursula for doing all of this part!

Pin onto the hip of the dress to determine the distance between each strip.  Take it off the dress and connect them all together by stitching 5cm between them (imagine being little people holding hands).

Pin the strips back onto the dress and space them out evenly.  Handstitch each piece into place.

So now comes the problem solving part of DIY projects, especially if you’ve never done them before:

  • The strips looked like an accordian after tacking it in place, not at all like the BCBG dress.  I played around with it a bit and pulled down each strip slightly, rolled it behind and tacked in place.  Looked more like a pumpkin after that but much cuter and I didn’t mind the reference since it reminded me of Cinderella 🙂
  • The sides were too bare and every time I bent my body, I would flash someone so I took some spare lace lying around and handstitched in onto the sides to close it off and add a bit of embellishment.
  • Ursula noted that there was something missing and said I should add a sash because the waistline looked bare and incomplete.  I felt a sash would add too many varying materials into the dress and cheapen the look.  So I dug around and found this $5 faux pearl necklace I thrifted when I was visiting Oregon coast.  Lo and behold, not only is it the perfect addition the dress, the length fits around perfectly!!!

And *drum roll* the final product!
Total cost was about $55.  Not too shabby!

I was extremely happy with the product and I finished it not a moment too soon – on the day of the photo shoot.

Photographer – Jun Ying of Kunioo  assisted by the talented Miya Gu
Bouquet/boutonniere – Lisa Wong of Blush Floral Designs
Makeup/hair/styling – Elena Tsang (me!)
Special thanks to –  Sam Chin for the suit; Ursula Tsang for assisting me in this project; Brenda Tsang-Chu for baking delicious treats used as props in the shoot; Jason Fung for being an awesome fiance and prepped the other props for the shoot.

Enjoy some pictures of it flowing in the wind!

DIY Dressform

First of my DIY Wedding series!

Doesn’t it look like a space skirt?

I made 3 dressforms – one for me, and one of each of my bridesmaids.

PRO:
Since I’ve made dresses for myself before, I get so tired of hopping in and out of my clothes and at the same time, not being able to pin myself down to make the clothing fit perfectly – so having a body double is great.
I’m also making the bridesmaids dresses for my wedding and they both live across the city. I thought it’ll be easier to have their body with me for fitting instead of calling them out every few days.

CONS:
If your weight fluctuates a lot, it may present a bit of a problem.  And if you don’t sew, what do you do with it?  I’m giving it to my bridesmaids along with their dresses so they can be creative about that.
If you stab pins into them, the glue from the tape will leave residue on your pins – ick!

========================================================

I didn’t take pictures of every single step because either I was doing it or had it done to me so doesn’t leave my hands free but that’s okay.  Hopefully the instructions are clear enough if you’re interested in making one and if not, you can always ask me!

Now there are YouTube videos about making dressforms that I skimmed while I made this one and though it’s not quite perfect yet.  I’ll post up what I can and also some tips to make yours actually perfect!  You definitely need someone reliable, careful, and meticulous to help you do this.

A relatively good video for reference is: http://www.youtube.com/watch?v=KI415xPiWbk

What you need:
Old T-shirt
2-3 rolls of duct tape

METHOD:

  1. Put on your old t-shirt and make sure it’s long enough to cover your bum.  Wear a non-padded, supportive bra for a nice bust shape.
  2. With legs shoulder-width apart and standing straight, wrap duct tape all around body right under your bum, around your waist (smallest part of body) and right under your breasts.  This will define the shape of your body.
  3. From the breast down, the first layer, I went horizontal layers across the front, back, and then the sides.
    TIP: Do not try to keep the tape perfectly straight because your body is not.  Curve the tape to the shape of your body to keep it accurate.  Especially the bum – lift it with the tape so it doesn’t flatten it.
    The second layer, I went vertical.  And the third layer, I went horizontal again.  This way, you ensure even thickness of tape all around.
  4. Around the breasts, it’s best to cut small pieces of tape and go in concentric circles to prevent weird bumps.  It also works well around the shoulders or anywhere with a lot of curves.
    I did not do that for the first two dressforms but did for the last one and it looks much better.
    Do three layers all around that upper region.
  5. Using a t-shirt sleeve or toilet paper, wrap around your neck and tape that area three times (none of my dressforms had this which I regret since it’ll be hard to gauge where the straps go or when needing to make halter necklines).
  6. Cut straight down the back (watch out for your underwear and bra!) and shimmy out of it.  Carefully tape the back securely.

You should be left with this!


Now comes the stuffing part which normally doesn’t get a lot of coverage in online tutorials so hopefully this will be more helpful.

What you need:

Wire hanger
Duct tape dressform (this is one of my bridesmaids)
Bag of fiber fill (I bought mine from Dressew)
Long cardboard pole which I got from Fabricland (call ahead because some stores re-use theirs for rolling fabric)
Duct tape
Cardboard (missing from image below)

So first take a wire and bend it in half and stick it into one of the cardboard pole.  This will be helpful (but not necessary) if you need to hang the dressform somewhere.  Insert into the dressform.

Start stuffing the bust region from the neck and arm holes.  Try to distribute evenly and make sure there are no empty spaces.  Seal off the arm holes first.

Take 1-2 strips of sturdy cardboard and wrap it around the pole, aligning the base of the wrapped cardboard with the base of the dressform, and tape into place.  This creates a stopper so the base doesn’t fold inwards from the weight of the dressform.

Measure the circumference of the base of the dressform and cut out and oval-shaped cardboard of the same size. Cut a hole the size of the pole in the middle.  You should use a sharp X-Acto knife because I tried to do it with scissors and I am in hurt!

Stuff! stuff! stuff! all areas from the neck and the base until it’s relatively firm all over the dressform and evenly distributed.
Make sure you stuff around the pole so it stays centered.
Slide the base through the pole until it hits the cardboard stopper.  Fold the remnant fabric over the edge of the cardboard and tape into place.  Add another stopper on the outside to prevent the dressform from sliding down the pole once it’s completed.

Finishing touches – Tape the neck hole (better if there was a neck shape) to the pole.  And the step that I missed – tape the hole of the cardboard to keep hanger in place.
And TA DA!  You’re very own customized dressform 🙂

I know there are some wrinkles but I didn’t stuff it as firmly as I could have.  I figured after the first one that it doesn’t need to be as stiff if I’m not actually draping with it but if you plan do, then definitely stuff it until firm.  Just don’t over-stuff to the point that the tape starts to rip open.

If you just want to fit a patterned dress over it, then you can leave it like this.  If you actually want to create outfits using the dimensions of your body, then mark it using a sharpie.

This is a great source to show you where to mark it:

And now you are ready to get creative!  I hope it was helpful and good luck!

A few additional TIPS for this project:

  • I found the stickiest, thickest, and most resilient duct tape was from Home Hardware.  Other brands are inferior.
  • You can buy coloured or patterned duct tape for the last layer to make your dressform prettier!
  • If you want to save money on fiber fill, you can buy a pillow when it’s on sale ($2-3 at Walmart) and wrap it around the pole and stuff it in the waist area.  That way you only need enough fiberfill for the bust and bum of the dressform 😉  One of my better ideas.
  • Get a cheap tripod/microphone stand and slide the pole over it.  It’ll keep your dressform standing straight.

Post-Wedding Bliss

To the past brides out there – ever get the feeling that your wedding is not really yours?

You have to consult with parents to make sure that the dress is appropriate, the make-up is not too out there, the hair is formal, the food is acceptable, ya di ya da.  At any rate, Paula would have looked good in a rag and the wedding definitely was her in many ways but only the side of her that can be displayed at an ‘appropriate’ wedding.

Isn’t she lovely?  Yes, that is yours truly by her side.

For me, I always recommend the bride to go with the ‘look back and won’t regret’ route with regards to hair colour, hair style, make-up, etc.  However, the au naturel approach doesn’t always apply because some people truly do not feel like themselves when, for example, they keep their natural hair colour.  That’s why hair, make-up, and styling can be so cool – you can show the world who you are as an individual or as a couple.  And if you can’t do it on the wedding day, you can do it with a post-wedding anniversary photoshoot 🙂

Vivid Moments Photographers (Raymond) is very fashion-oriented, paying particular attention to posing which highlights a woman’s best features.

Paula is all about fashion and her evening gown didn’t get a hint of justice on the big day.  First off, the gown is more risque which is so her style.  Second of all, it’s from Japan – the country where the couple were engaged and where her style was based for the last few years.
Unfortunately, there were insufficient photos from the reception to capture it’s beauty.  But no matter!  This time around, we had the chance to give her the hairstyle and make-up of choice to match the fab dress.

[Unedited Snapshot]

Makeup:
Inspired by models in Japanese fashion magazines – the more natural type, not ganguro-style or the ones where your lashes are attached 1cm below your actual eyes.

To get the look –  Use purple shadow on the lids and blend with a brown at the crease.  Thin black eyeliner and a bit of purple glitter below the lower lash line (if you can’t already tell, purple is her fave colour).  A medium coverage foundation to perfect the skin, topped with a cool pink, slightly shimmery blush to add a glow and a bit of bronzer to sculpt cheeks.  Lip colour is also a cool toned, muted pink with a thin layer of gloss to add fullness.

Hairstyle:
Half-good-girl-half-bad-ass is probably the best way to put it.  This was inspired by a character in a Taiwanese drama who wore her short hair similar to this on her wedding day.  Paula coloured her hair in Japan which she has been itching it do ever since she had to grow out her natural locks.  Though deemed inappropriate for the actual wedding, this style definitely showcases Paula’s multifaceted characteristics.

To get the look – part the hair and section away the fringe.  Curl hair using a clampless iron.  Section, twist and pin (into the twist) the side opposite the fringe.  Curl and position fringe so it swoops nicely into the curls.

And here are a few more!

Your exclusive BTS look: